Viccon Wood Care Wood Finish Stripper – 5L
Professional-grade timber & deck finish remover — removes film, oil and solvent-based finishes.
- Removes oil, water & solvent-based timber coatings from all species of timber
- Remove multiple layers in one application
- Saves hours of sanding
- Safe for gardens, no harsh chemicals
- Use on decks, fences, pergolas & furniture
- Spray, brush, or roll on
- Treat 3–6 m² per litre - Single Application
- Always follow with Wood Rejuvenator for best results
Free Standard Delivery
ORDERS $299+
All products qualify across standard delivery zones.
Your available delivery options and final freight cost are confirmed at checkout.
Australia-Wide Delivery
Metro, regional and interstate delivery options are shown before payment based on your postcode and order contents.
Real Product Advice
Contact our Melbourne team before or after purchase for practical help with product selection, quantities and application.
Secure Checkout
Review your products, delivery cost and complete order total before securely submitting payment.
Homeowners & Trade Welcome
Whether it is one home project or ongoing professional work, we can help you order the right products and quantities.
| size: 5L |
| Brand: Viccon Wood Care |
Viccon Wood Care
Selected by Sealix for reliable performance, practical application and proven results.
PRODUCT INFORMATION
Everything you need before you start
Check where it fits, how to use it, technical details and documents—all in one place.
OVERVIEW & HOW TO USE
What to know about this product
Check the product’s purpose, suitability and application information before getting started.
Remove Timber & Deck Coatings and Sealers the Smart Way — No More Endless Sanding
Viccon Wood Finish Stripper is a professional-grade timber restoration solution designed to break down multiple layers of oil-, solvent-, and water-based coatings and sealers in a single application—saving hours or even days of labor-intensive sanding.
Whether you're removing faded decking oils, peeling coatings, or thick built-up finishes, this product does the hard work for you.
Formulated without harsh chemicals, it’s safe to use around gardens and pets when applied as directed.
- Removes multiple layers in a single application
- Suitable for both horizontal and vertical timber surfaces
- Coverage: 3–6 m² per litre
- Tested on Intergrain, Cabots, Cutek, Haymes, Feats Watson, Flood, Sikkens, and other timber coating systems
- Ideal for decks, fences, pergolas, and outdoor furniture
- Garden- and pet-friendly formula
- Clear the surface area of dust and debris. Ensure the surface is completely dry before application.
- Wear protective gloves, safety glasses, and a respirator.
- Shake the container well. Apply undiluted using a spray pump, brush, or roller.
- Keep the surface consistently wet — reapply stripper or lightly mist with water as needed.
- Allow the product to dwell for 45–60 minutes. Heavier or aged coatings may require additional time.
- Use a petrol-powered pressure washer with a maximum pressure of 3000 PSI and minimum 11 L/min flow rate.
- For best results, fit a turbo nozzle and maintain a safe working distance to avoid timber damage.
- Always work along the direction of the timber grain. Rinse thoroughly to remove all chemical residues.
- Follow with Viccon Wood Rejuvenator to neutralise the timber and prepare the surface for resealing.
Viccon Wood Finish Stripper is suitable for use on a wide range of hardwood and softwood species. Its advanced formula works with the timber’s natural grain and porosity, delivering effective results without surface damage.
Compatible species include:
- Merbau
- Spotted Gum
- Silver Ash
- Blackbutt
- Tallowwood
- Jarrah
- Ironbark
- Cypress Pine
- Treated Pine
- Radiata Pine
- Other exterior timber species used in decking, cladding, and outdoor structures
- Work in manageable sections of up to 30 m² for better control
- Avoid application in temperatures above 35°C
- Always test turbo nozzles on a small section before full use
- Do not pressure blast at close range — keep the lance moving and at a safe distance
- Thicker or stubborn finishes may require a second application
- Is this product safe for plants and garden areas?
- Yes — it’s water-based, biodegradable, and safe when used as instructed.
- What safety gear is required?
- Use gloves, safety glasses, and a respirator. Apply only in well-ventilated areas.
- Does this work on all finishes?
- It removes water-, oil-, and solvent-based finishes. Not suitable for epoxy or two-pack coatings.
- How many layers can it strip?
- Up to six layers, depending on the coating’s age, type, and thickness.
- What is the expected coverage?
- Approximately 3–6 m² per litre under standard conditions and single application.
- Do vertical surfaces need special treatment?
- Yes — they may require additional dwell time or a repeat application.
Deck restoration customer reviews
Reviews of the Viccon Coated Deck Restoration System, which includes Wood Finish Stripper and Wood Rejuvenator. Originally collected through Viccon Deck & Fence and displayed by ProductReview.com.au.