15L Wood Finish Stripper for Deck & Timber | Viccon Wood Care
Professional-grade timber & deck finish remover — removes film, oil and solvent-based finishes.
- Removes oil, water & solvent-based timber coatings from all species of timber
- Remove multiple layers in one application
- Saves hours of sanding
- Safe for gardens, no harsh chemicals
- Use on decks, fences, pergolas & furniture
- Spray, brush, or roll on
- Treat 3–6 m² per litre - Single Application
- Always follow with Wood Rejuvenator for best results
Free Metro Delivery
Enjoy FREE metro delivery on all orders $199 +
NSW, VIC, QLD, ACT, and SA.
(Standard delivery rates apply for orders under $199 or outside metro areas.)
Not applicable to dangerous goods.
| size: 15L |
| Brand: Viccon Wood Care |
15L Deck & Timber Finish Stripper
Professional-grade timber finish stripper for exterior wood restoration.
Viccon Wood Finish Stripper is designed to break down old decking oils, timber coatings, sealers, and selected film-forming finishes from exterior timber surfaces. It helps reduce heavy sanding during preparation and gets timber ready for rejuvenating and resealing.
The 15L size is ideal for larger timber restoration jobs, including decks, fences, pergolas, cladding, outdoor furniture, and other exterior timber surfaces. It is suitable for contractors, property maintenance teams, and serious DIY users who need reliable stripping performance across larger areas.
Coverage: approximately 3–6m² per litre, depending on coating type, timber condition, surface porosity, and application method.
Best For
Removing old decking oils and exterior timber finishes
Preparing timber before rejuvenating and resealing
Exterior deck restoration
Fence, pergola, cladding, and outdoor furniture restoration
Large timber maintenance jobs
Contractors, property maintenance teams, and high-volume users
Not Suitable For
This product is not suitable for removing paint, varnish, polyurethane, epoxy, two-pack coatings, or heavy industrial coatings. Always test on a small area before full application.
Watch Product Application
See how Viccon Wood Finish Stripper helps remove old timber coatings before rejuvenating and resealing.
- Breaks down old decking oils, sealers, and selected timber coatings
- Helps reduce sanding time during timber preparation
- Suitable for horizontal and vertical exterior timber surfaces
- Coverage: approximately 3–6m² per litre
- Tested on common timber coating systems, including Intergrain, Cabot's, Cutek, Haymes, Feast Watson, Flood, Sikkens, and similar finishes
- Ideal for decks, fences, pergolas, cladding, and outdoor furniture
- Water-based formula; use safely around gardens and pets when applied strictly as directed
- Clear the surface area of dust, loose coating, dirt, and debris. Ensure the surface is dry before application.
- Wear protective gloves, safety glasses, suitable clothing, and a respirator. Apply only in well-ventilated outdoor areas.
- Shake the container well. Apply undiluted using a pump sprayer, brush, or roller.
- Keep the surface consistently wet. Reapply stripper or lightly mist with water as required to stop it drying out.
- Allow the product to dwell for 45–60 minutes. Heavier, older, or thicker coatings may require additional dwell time or a second application.
- Rinse using a petrol-powered pressure washer. For best results, use up to 3000 PSI with a minimum 11L/min flow rate.
- Where suitable, use a turbo nozzle and maintain a safe working distance to avoid damaging the timber.
- Work along the direction of the timber grain. Rinse thoroughly to remove all residue.
- Follow with Viccon Wood Rejuvenator to neutralise and brighten the timber before resealing.
Viccon Wood Finish Stripper is suitable for many exterior hardwood and softwood species. Always test first, as coating age, timber porosity, and previous maintenance history can affect stripping performance.
Compatible species include:
- Merbau
- Spotted Gum
- Silver Ash
- Blackbutt
- Tallowwood
- Jarrah
- Ironbark
- Cypress Pine
- Treated Pine
- Radiata Pine
- Other exterior timber species used in decking, cladding, fencing, pergolas, and outdoor structures
- Work in manageable sections of up to 30m² for better control
- Avoid application in direct hot sun or temperatures above 35°C
- Do not allow the stripper to dry on the surface during dwell time
- Always test turbo nozzles on a small section before full use
- Do not pressure blast at close range — keep the lance moving and at a safe distance
- Thicker or stubborn finishes may require a second application
- After stripping and rejuvenating, finish with a suitable decking oil or exterior timber sealer
Can this remove decking oil?
Yes. It is designed to remove old decking oils and timber finishes from exterior timber surfaces.
Can this remove paint or polyurethane?
No. This product is not suitable for paint, varnish, polyurethane, epoxy, two-pack coatings, or heavy industrial coatings.
What is the expected coverage?
Coverage is approximately 3–6m² per litre, depending on timber condition, coating build-up, surface porosity, and application method.
Do I need to use a pressure washer?
Yes, for best results. A petrol pressure washer up to 3000 PSI with at least 11L/min flow is recommended.
Should I use a rejuvenator after stripping?
Yes. Use Viccon Wood Rejuvenator after stripping to neutralise and brighten the timber before sealing.
Is it safe around gardens and pets?
It is water-based and can be used around gardens and pets when applied strictly as directed. Keep pets and people away from the work area during application and rinsing.
Do vertical surfaces need special treatment?
Yes. Vertical surfaces may need smaller working sections, reapplication, or additional dwell time because of runoff.
Product Summary
Product: Viccon Wood Finish Stripper
Size: 15L
Use: Removes old decking oils, timber coatings, sealers, and selected film-forming finishes
Surfaces: Exterior timber decks, fences, pergolas, cladding, and outdoor furniture
Application: Apply undiluted by pump sprayer, brush, or roller
Dwell time: 45–60 minutes
Coverage: Approximately 3–6m² per litre
Follow-up: Use Viccon Wood Rejuvenator before resealing
Not suitable for: Paint, varnish, polyurethane, epoxy, two-pack coatings, or heavy industrial coatings