?unique=740f3a2)
Strip, Rejuvenate, Prime & Seal Timber Deck Kit Polished Look (30m²)
- All-in-one pack: Strip, neutralise, and reseal in one kit
- Removes water-, oil-, and solvent-based coatings
- Restores timber colour and prepares fibres for resealing
- Reseals with a long-lasting polished look finish
- Includes an extra 5L stripper for second application if required
- Comes with a step-by-step guide for confidence and ease
Free Delivery On $100+ Orders
Metro & Regional (VIC, NSW, QLD, ACT, SA).
Excludes Local Same Day And Remote Delivery.
The Complete Strip, Rejuvenate & Seal Timber Deck Kit – Polished Look (30m²) is built for decks previously coated with oils, stains, or sealers that are now peeling, patchy, or worn. This system includes everything needed to reset the timber, restore its natural colour, and lock in a fresh, polished finish that lasts.
The process begins with the Wood Finish Stripper, powerful enough to remove multiple layers of old coatings. To ensure you don’t run short, this kit includes an extra 5L container — because from past years we’ve seen that around 30% of decks require a second stripper application, particularly when heavy coatings, older equipment, or inconsistent application are factors.
Once stripped, the Rejuvenator neutralises and brightens the timber fibres, restoring the natural appearance and ensuring optimal adhesion of the new finish. Finally, the deck is sealed with a three-coat polished look system (UVEX Primer + 2x Dexpress Finish), delivering a durable satin sheen that resists UV, moisture, and wear under Australian conditions.
This kit is ideal for:
- Coated decks with peeling or patchy finishes
- Surfaces coated with heavy oils, stains, or film-forming sealers
- Older decks needing a full reset before resealing
Supplied with a step-by-step guide, this kit gives both tradies and DIYers the confidence to strip, rejuvenate, and seal their deck the right way — for a polished, professional-grade result that stands the test of time.
The Complete Strip, Rejuvenate & Seal Kit is the ultimate solution for decks coated with oils, stains, or sealers that have failed over time. It takes your deck back to bare timber, restores the fibres, and applies a new protective finish in one system.
- Strips away failed finishes and stubborn coatings
- Restores timber fibres and natural colour
- Reseals with a polished look, satin sheen finish
- Sized for 30m² decks, includes an extra 5L stripper for second application if required
- Tested and proven under Australian conditions
Clear the deck of furniture and sweep clean.
Ensure surface is dry.
Wear gloves, mask, and safety glasses.
Shake and apply stripper undiluted with a pump sprayer, brush, or roller. Keep surface wet for 45–60 minutes. Mist with water if drying.
Test softness of coatings. Reapply stripper where needed. Use the extra 5L supplied if a second application is required.
Pressure wash thoroughly with a petrol washer (max 3000 PSI, min 11 L/min), working with the grain.
Apply Rejuvenator evenly. Allow 15–20 minutes dwell time, agitating stubborn spots with a brush. Rinse thoroughly.
Once dry, lightly sand if required, then apply 1 coat UVEX Primer + 2 coats Dexpress finish for a polished look.
Decks with patchy or peeling finishes
Timber coated with oils, stains, or film-forming sealers
Surfaces needing a complete reset before resealing
Older decks where multiple coatings have built up over time
Work in manageable sections up to 30m² at a time
Avoid application in full sun or above 35°C
Keep surface consistently wet during stripper dwell time
Always test turbo nozzles on a small area before use
Use the included extra 5L stripper for tough, heavily coated areas
Why does this kit include an extra 5L stripper?
From past experience, about 30% of decks require a second application due to thick coatings, weaker pressure washers, or uneven application. This kit ensures you won’t run short.
What safety gear do I need?
Gloves, safety glasses, and a respirator are essential. Apply only in well-ventilated areas.
What coatings does this strip?
Removes oil-, water-, and solvent-based deck coatings. Not suitable for epoxy or two-pack finishes.
What finish will my deck have?
This kit delivers a polished look satin sheen finish using a UVEX Primer + 2x Dexpress coats.
What’s the coverage?
Sized for decks up to 30m², including an allowance for second stripper application if needed.