Strip, Rejuvenate & Oil Timber Deck Kit Matt Look (60m²)

• Stripper: 1 × 15L Viccon Wood Finish Stripper
• Rejuvenator: 1 × 15L Viccon Wood Rejuvenator
• Timber oil: 1 × 10L plus 1 × 5L CUTEK Extreme CD50 (15L total)
• Colour option: Clear is the standard option, or 3 × CUTEK Colourtones are included free when a colour is selected. The Clear option includes no Colourtone tins.

Why extra stripper is included: From SEALIX’s experience restoring decks over many years, smaller decks are often maintained more frequently and can develop a thicker build-up of oils, stains or sealers. This 60m² kit therefore includes 15L supplied in one container to provide additional allowance for a second stripper application where the first application does not fully soften and remove the accumulated finish.

The pack quantities are selected to cover each stage of the restoration process. Application tools, a pressure washer and personal protective equipment are not included.

• Decks with worn, patchy, peeling or failing oils, stains and compatible deck coatings
• Older timber requiring a full reset before applying a new finish
• DIY renovators and professionals who want compatible preparation and finishing products in one complete system
• Decks up to approximately 60m², depending on coating build-up and timber absorption

Not designed for: epoxy or two-pack coating removal, structurally unsound timber, or simply cleaning bare timber that does not require stripping.

This kit is configured for a deck area of approximately 60m², but the stated area is a planning guide rather than a guarantee.

• Old coating type, thickness and number of layers affect stripper consumption.
• Some heavily coated areas may require a second stripper application.
• Rough, weathered or absorbent timber uses more finishing product than smooth, dense timber.
• Measure the complete deck, including steps and other timber being coated.
• Do not stretch the finish beyond the manufacturer’s recommended spreading rate.

If the deck has multiple heavy layers or an unknown coating, test a small area before beginning the full project.

1. Inspect and test: identify the existing coating and complete a stripper test patch. Confirm it is not an epoxy or two-pack system.
2. Prepare the area: remove furniture, sweep the deck, protect nearby surfaces and vegetation, and wear the required protective equipment.
3. Strip: apply Viccon Wood Finish Stripper undiluted with a chemical-resistant sprayer or brush. Keep it wet during the approximately 45-60 minute reaction period.
4. Remove the coating: test whether the coating has softened, then pressure wash carefully with the grain. Reapply stripper to remaining coating where required.
5. Rejuvenate: apply Viccon Wood Rejuvenator evenly, allow approximately 15-20 minutes of contact time, agitate stubborn areas if needed, then rinse thoroughly.
6. Dry and inspect: allow the timber to dry completely. Complete a light finishing sand where raised fibres or remaining defects require it.
7. Oil: apply CUTEK Extreme CD50 to clean, bare, dry timber in thin coats. Allow each coat to become fully dry and non-greasy before recoating, following the product label.

Weather, timber temperature and moisture affect application and drying. Always follow the instructions on the product labels supplied.

This kit creates a penetrating Matt Look with CUTEK Extreme CD50.

Clear is standard: choose Clear when natural weathering and silvering is acceptable. If a colour is selected, the required 3 CUTEK Colourtones are included free with the kit.

Selectable options: Black Ash, Golden Tone, Walnut, Autumntone, Burnt Red, Dusky Brown, Grey Mist, Honeycomb, New Bronztone, Rustic Gold, Sela Brown, White Wash, Burnt Ash, Cedartone, Smokey Grey, Clear.

• A CUTEK Colourtone is recommended when maintaining timber colour and improving UV colour protection is the priority.
• Colour appearance varies by timber species, preparation and number of coats. Always complete a test patch.
• The coloured-option value is approximately $1182.50 including GST, while the Clear compare price is shown as the static website compare price.

• Read every product label and safety data sheet before use.
• Wear suitable gloves, eye protection, protective clothing and respiratory protection required by the label.
• Protect painted surfaces, metal, masonry, plants, pools and surrounding areas from chemical contact and rinse water.
• Keep preparation products wet only for their specified reaction time; do not allow them to dry on the surface.
• Use pressure-washing equipment carefully to avoid cutting or damaging timber fibres.
• Do not mix the products together. Rinse thoroughly between preparation stages.
• Do not apply finishing products to damp timber or when rain, unsuitable temperatures or heavy condensation are expected.

Why is extra stripper included in this 60m² kit?
Based on SEALIX’s experience over many years, smaller decks are often recoated and maintained more frequently. This can create a thicker finish build-up that may not be removed completely in one pass. The 15L supplied in one container provides allowance for a repeat application where required.

Does this kit include tools?
No. This kit includes the preparation and finishing products listed above. You will also need suitable application tools, a pressure washer and the personal protective equipment specified on each product label.

Does Clear include Colourtones?
No. Clear is the standard option and includes no Colourtone tins. Choose a colour and the required 3 CUTEK Colourtones are included at no extra cost. Choose Clear and no Colourtone tins are included.

Will it cover exactly 60m²?
Coverage is approximately 60m². Heavy coatings, repeat stripping and porous timber can increase the amount of product required.

Can it remove every coating?
No. Complete a test patch first. The stripper is not intended for epoxy or two-pack finishes.

Can I apply the finish immediately after rejuvenating?
No. Rinse thoroughly and allow the timber to dry completely before inspection, sanding and finishing.

Why SEALIX recommends it: This is our preferred complete system for customers who want a natural matt appearance, penetrating timber protection and straightforward future maintenance without building a surface film.

• Choose a Colourtone when colour retention and UV colour protection matter; choose Clear only when natural silvering is acceptable.
• CD50 must reach clean, bare, dry timber. Remaining film-forming coating will prevent correct penetration.
• Apply thin coats and allow the product to dry fully between coats; more product is not automatically better.
• The 60m² kit contains 1 × 10L plus 1 × 5L CUTEK Extreme CD50 (15L total); confirm the selected colour before ordering.