SIF SI20-DS Densifier – 20L
Key Benefits
Densifies and strengthens concrete internally
Reduces dusting and surface degradation
Repels water and limits water-based staining
Minimises efflorescence and organic growth
VOC-free and environmentally safe
Made for long-term performance in exposed and high-traffic environments
Free Standard Delivery
ORDERS $299+
All products qualify across standard delivery zones.
Your available delivery options and final freight cost are confirmed at checkout.
Australia-Wide Delivery
Metro, regional and interstate delivery options are shown before payment based on your postcode and order contents.
Real Product Advice
Contact our Melbourne team before or after purchase for practical help with product selection, quantities and application.
Secure Checkout
Review your products, delivery cost and complete order total before securely submitting payment.
Homeowners & Trade Welcome
Whether it is one home project or ongoing professional work, we can help you order the right products and quantities.
| size: 20L |
| Brand: SIF |
SIF
Selected by Sealix for reliable performance, practical application and proven results.
Want tougher, longer-lasting concrete? Start from the inside out.
SI20-DS is a penetrating silicate densifier that chemically reacts within concrete’s capillary structure to form a harder, more durable matrix. The result? Concrete that’s stronger, dustproof, and more water-resistant — without forming a surface film.
Perfect for warehouse floors, driveways, patios, garage slabs, and new commercial pours, this product is your go-to when:
You need long-term durability and abrasion resistance
You want to reduce dusting and surface softening
You’re prepping for polishing or sealing
You want a breathable finish with no surface coating
Note: This is not a surface sealer. It hardens and seals from within, allowing vapour to escape.
🧱 Where It Works Best
Internal & external concrete
Smooth or broomed finishes
Polished concrete prep
Driveways, garages, car parks, industrial floors
New concrete (post-cure only)
🛠️ Application Tips
Prep is critical
Clean the surface completely (no dust, grease, or coating).
Concrete must be porous—do the water drop test: if water beads for over 2 mins, porosity is too low.
Use clean gear
Apply with a low-pressure sprayer, then spread with a broom or mop.
Work wet-on-wet for multiple coats. Avoid pooling.
Don’t rush drying
Any excess must be removed before drying. Dried residue will require grinding or sanding.
Avoid foot/vehicle traffic for 24 hours. Full cure in 7 days.
Weather matters
Ideal temp: 5–30°C
Avoid application if rain is forecast within 24 hours.
Overspray caution
Wipe any overspray off metal, glass or paint immediately. SI20-DS is alkaline.
⚠️ Important Notes
SI20-DS may slightly darken some surfaces.
It reduces porosity but does not block stains from long contact — clean spills promptly.
Not suitable for non-porous or burnished concrete.
🧪 Product Info
Size: 20L
Appearance: Clear liquid
VOC: Zero
Clean-up: Water
Coverage: Approx. 6–8 m² per litre (depending on porosity)
Made in Australia