Rockstar Salt Stop – 5L
Rockstar Salt Stop is a penetrating saltwater and de-icing sealer for porous mineral surfaces, paving, pool surrounds and infrastructure. It helps block water and salt ingress while allowing the surface to breathe.
- Size: 5L
- Colour / finish: Clear invisible natural finish
- Formula: Water-based silane penetrating salt and water-repellent sealer
Free Standard Delivery
ORDERS $299+
All products qualify across standard delivery zones.
Your available delivery options and final freight cost are confirmed at checkout.
Australia-Wide Delivery
Metro, regional and interstate delivery options are shown before payment based on your postcode and order contents.
Real Product Advice
Contact our Melbourne team before or after purchase for practical help with product selection, quantities and application.
Secure Checkout
Review your products, delivery cost and complete order total before securely submitting payment.
Homeowners & Trade Welcome
Whether it is one home project or ongoing professional work, we can help you order the right products and quantities.
| size: 5L |
| Brand: RockStar |
RockStar
Selected by Sealix for reliable performance, practical application and proven results.
Protect your paving, pool surrounds and stonework from salt corrosion — permanently.
Salt Stop is a pro-grade, penetrating silane sealer that locks out water and salts without forming a film. Whether you’re sealing around a saltwater pool, protecting pavers from de-icing salts, or hardening concrete against the elements — this product delivers serious, long-lasting performance.
It bonds chemically inside porous materials like:
Concrete pavers
Porous tiles & grout
Brickwork
Terracotta
Natural stone (e.g. sandstone, travertine)
Ideal for:
Saltwater pool zones
Exposed coastal paving and facades
Driveways, garages, balconies
Council paths, public infrastructure, hardscapes in frost zones
🛑 Not for surfaces already exposed to salt. Always seal before contamination for best results.
Application Tips
Surface prep matters
Surface must be dry, clean, and salt-free.
Remove any prior coatings, dirt, or contaminants.
Tools
Low pressure pump sprayer, brush, or roller.
For best results: flood-coat method using a sprayer.
Apply generously
Keep surface glossy wet for 10 mins. Recoat immediately if it absorbs too fast.
Wipe off standing product to prevent patchiness.
On verticals, apply top-down, allowing the liquid to run 30–50cm.
Curing time
Surface repellency starts once dry.
Full cure in 24–72 hrs — avoid heavy traffic during first 24 hrs.
Coverage
Up to 12 m² per litre (single coat) depending on porosity
Highly porous surfaces may require 2 coats
Product Info
Appearance: Milky white liquid (dries invisible)
Finish: Natural look
VOC: <15 g/L
pH: Neutral (7–8)
Pack size: 5L
Clean-up: Water