Prime Exposure One Coat Sealer – 20L
The Prime Exposure One Coat Sealer is a professional-grade xylene-based solvent sealer made for exposed aggregate concrete. Designed for Australian conditions, it penetrates and seals in just one coat, delivering long-lasting protection and enhancing decorative finishes while saving time and labour.
- Xylene solvent-based formula – strong, professional performance
- One-coat system reduces labour and application time
- Specifically engineered for exposed aggregate concrete
- Enhances colour and natural appeal of decorative concrete
- Protects against mould, algae, dirt, grime, oils, and staining
- UV resistant – resists fading under harsh Australian sun
- Coverage: approx. 70–80m² per 20L
Not available through standard parcel courier networks.
Contact SEALIX for delivery help before ordering.
Free Standard Delivery
ORDERS $299+
All products qualify across standard delivery zones.
Your available delivery options and final freight cost are confirmed at checkout.
Australia-Wide Delivery
Metro, regional and interstate delivery options are shown before payment based on your postcode and order contents.
Real Product Advice
Contact our Melbourne team before or after purchase for practical help with product selection, quantities and application.
Secure Checkout
Review your products, delivery cost and complete order total before securely submitting payment.
Homeowners & Trade Welcome
Whether it is one home project or ongoing professional work, we can help you order the right products and quantities.
| size: 20L |
| Brand: Prime Exposure |
Prime Exposure
Selected by Sealix for reliable performance, practical application and proven results.
The Prime One Coat Sealer is built for exposed aggregate concrete driveways, paving, and outdoor entertaining areas. Its solvent-based, xylene formulation penetrates deep into the surface, binding and sealing to protect against dirt, oil, and contaminants while resisting weathering and UV damage.
Unlike multi-coat systems, this sealer is engineered to work in just one coat — saving time and money without compromising durability. With its penetrating action, it enhances the natural colour of decorative concrete, delivering a fresh, long-lasting finish that stands up to Australian conditions.
- Solvent-based, xylene formulation for tough, lasting protection
- Designed specifically for exposed aggregate concrete
- One coat application saves time, labour, and cost
- Enhances decorative colour and appearance
- Protects against mould, algae, grime, oil, and stains
- UV resistant for long-term colour stability
- Surface Preparation:
- Ensure new concrete has cured for at least 7 days.
- Pressure wash thoroughly (2000+ PSI).
- Acid etch with diluted HCl (9:1 water:acid), then rinse well.
- Allow surface to completely dry — moisture will cause whitening or adhesion failure.
-
Application:
- Stir well before use.
- Apply neat, undiluted, to exposed aggregate only.
- Use a quality 20mm NAP roller for even coverage.
- Apply evenly without pooling.
-
Resealing:
- Clean as above, ensure surface is totally dry.
- Apply Prime Exposure Xylene Blend first to reactivate existing sealer.
- After 4+ hours drying, reapply One Coat Sealer.
-
Curing & Traffic:
- Allow up to 7 days to fully cure and harden.
- Keep sealed areas free from vehicle traffic for 3–4 days.
Clean-Up: Wash all tools in Prime Exposure Xylene Blend and allow to dry.
- Sealing freshly laid exposed aggregate concrete driveways
- Resealing weathered exposed aggregate to restore colour and protection
- Decorative outdoor paving and concrete in harsh weather conditions
- Jobs where a fast, one-coat system saves significant time and cost
- Apply only in temperatures between 10°C and 35°C.
- Avoid sealing if rain or dew is expected within 3 hours.
- Always ensure surface is bone dry before application.
- Mix in Prime Anti-Slip Glass Beads on slopes or high-traffic areas.
- Apply in smaller sections to maintain consistent coverage.
- Is this sealer water-based or solvent-based?
It is a solvent-based xylene sealer, not acrylic or water-based.
- What surfaces is it designed for?
It is specifically engineered for exposed aggregate concrete. Not suitable for flat trowel or slate impression concrete.
- What coverage can I expect from 20L?
Approximately 70–80m², depending on porosity and conditions.
- How soon can I drive on my driveway after sealing?
Allow 3–4 days before vehicle traffic, longer in cooler/humid conditions.
- Will the surface become slippery?
Like all sealers, it may become slippery when wet. Use Prime Exposure Anti-Slip Glass Beads to reduce slip risk.
- How long will it last?
With correct preparation and application, it delivers long-term protection and enhanced appearance for years.