FREE SAMPLE KIT Wood Rejuvenator and Wood Finish Stripper | Viccon Wood Care
Test Wood Finish Stripper and Wood Rejuvenator on a small section before planning the full restoration.
Compatibility: Viccon Wood Finish Stripper is designed to remove oil-, water- and solvent-based timber coatings. It will not effectively remove Haymes Dexpress, Intergrain DWD, or similar cross-linked or clear varnish products. If you’re not sure what finish is on your deck, send our team a few photos before ordering and we’ll help confirm compatibility.
This sample is intended to help check how a compatible existing timber finish responds before you order a full-size stripping system.
Free Standard Delivery
ORDERS $299+
All products qualify across standard delivery zones.
Your available delivery options and final freight cost are confirmed at checkout.
Australia-Wide Delivery
Metro, regional and interstate delivery options are shown before payment based on your postcode and order contents.
Real Product Advice
Contact our Melbourne team before or after purchase for practical help with product selection, quantities and application.
Secure Checkout
Review your products, delivery cost and complete order total before securely submitting payment.
Homeowners & Trade Welcome
Whether it is one home project or ongoing professional work, we can help you order the right products and quantities.
| Size: FREE SAMPLE |
| Brand: Viccon Wood Care |
Viccon Wood Care
Selected by Sealix for reliable performance, practical application and proven results.
PRODUCT INFORMATION
Everything you need before you start
Check where it fits, how to use it, technical details and documents—all in one place.
OVERVIEW & HOW TO USE
What to know about this product
Check the product’s purpose, suitability and application information before getting started.
Compatibility: Viccon Wood Finish Stripper is designed to remove oil-, water- and solvent-based timber coatings. It will not effectively remove Haymes Dexpress, Intergrain DWD, or similar cross-linked or clear varnish products. If you’re not sure what finish is on your deck, send our team a few photos before ordering and we’ll help confirm compatibility.
Viccon Wood Rejuvenator is the essential second step in the Viccon's Timber Restoration System — a professional-grade solution that brightens and restores timber after stripping or deep cleaning. It neutralises any remaining chemicals, brightens aged or stained timber, and prepares the surface for coating.
Perfect for deck maintenance cleans sealed with penetrating sealers or full restoration projects. Gentle on the environment, tough on stains.
- Neutralises stains, chemical residue, tannins, and rust
- Restores timber to its natural colour
- Ready-to-use — no mixing required
- Works in 15–20 minutes
- Easy application by spray, brush, or roller
- Coverage: 6–8 m² per litre
- Suitable for use on all exterior timber: decks, fences, pergolas, outdoor furniture
- Prep the timber — use Wood Finish Stripper or Wood Deep Cleaner first. Ensure the surface is clean and free of oils, finishes, and organic growth.
- Lightly pre-wet the surface with a garden hose mist if dry.
- Wear protective gear: gloves, eyewear, and a respirator.
- Shake well and apply the product undiluted using spray, broom, or roller.
- Work in sections up to 30 m². Keep the surface wet during dwell time.
- Let sit for 15–20 minutes. For deep stains, reapply if needed.
- Rinse thoroughly using a pressure washer (max 2700 PSI) or hose, working with the timber grain.
- Light sanding (60–80 grit) is recommended to smooth lifted fibres and remove residual finishes.
- Allow timber to fully dry (moisture <15%) before applying sealer.
- Not suitable for animal urine stains
- Whitening may occur temporarily if not rinsed properly — disappears within 1 hour
- Some timber may appear lighter after use but will darken again once sealed
- Use in well-ventilated areas only
- Wood Finish Stripper / Deep Cleaner – Remove coatings and contaminants
- Wood Rejuvenator – Neutralise, brighten, and prep
Compatibility FAQ
Does Wood Finish Stripper work on oil-, water- and solvent-based coatings?
Yes. It is designed to remove oil-, water- and solvent-based timber coatings. The exceptions are Haymes Dexpress, Intergrain DWD, and similar cross-linked or clear varnish products, which it will not remove effectively. If you’re not sure what finish is on your deck, send our team a few photos before ordering so we can help confirm compatibility.