Deep Clean & Rejuvenate Deck Kit (20–30m²)
New deck or grey timber that’s never been oiled? This kit helps get it ready for a fresh start.
- Includes 5L Wood Deep Cleaner and 5L Wood Rejuvenator
- For around 20–30m², depending on timber condition
- Cleans tannins and dirt, then brightens and neutralises the timber
- Final oil or coating is sold separately
Previously oiled or coated? Choose Strip & Rejuvenate instead, or send us a few photos for help.
Free Standard Delivery
ORDERS $299+
All products qualify across standard delivery zones.
Your available delivery options and final freight cost are confirmed at checkout.
Australia-Wide Delivery
Metro, regional and interstate delivery options are shown before payment based on your postcode and order contents.
Real Product Advice
Contact our Melbourne team before or after purchase for practical help with product selection, quantities and application.
Secure Checkout
Review your products, delivery cost and complete order total before securely submitting payment.
Homeowners & Trade Welcome
Whether it is one home project or ongoing professional work, we can help you order the right products and quantities.
| Brand: Viccon Wood Care |
Viccon Wood Care
Selected by Sealix for reliable performance, practical application and proven results.
PRODUCT INFORMATION
Everything you need before you start
Check where it fits, how to use it, technical details and documents—all in one place.
OVERVIEW & HOW TO USE
What to know about this product
Check the product’s purpose, suitability and application information before getting started.
Restore Grey Timber & Prepare New Decks
Got a new deck, or grey timber that’s never been oiled or coated? This kit gives you the two preparation steps: clean with Wood Deep Cleaner, then brighten and neutralise with Wood Rejuvenator. Your final oil or coating is sold separately.
Has anything been applied before? Some water-based deck coatings are sold as “decking oil”, which can make choosing confusing. For previously oiled or coated timber, choose the Strip & Rejuvenate kit, or send us photos and we’ll help.
- 1 × Viccon Wood Care Wood Deep Cleaner – 5L
- 1 × Viccon Wood Care Wood Rejuvenator – 5L
This is a two-stage preparation kit. A final deck oil, stain or coating is purchased separately.
Choose this kit for new timber before its first coat, or grey, weathered timber that has never been oiled or coated.
For a deck that has been oiled or coated before, choose Strip & Rejuvenate. Not sure what’s on it? Send SEALIX a few photos before ordering.
The kit is sized for approximately 20–30m². Coverage varies with timber species, porosity, surface texture, weathering and application method.
Measure the deck, inspect several areas and test a small section before starting. Very rough or absorbent timber may use more product.
- Remove furniture and sweep away loose dirt.
- Apply Wood Deep Cleaner according to the label, working in manageable sections. Agitate where required and rinse thoroughly.
- Apply Wood Rejuvenator according to the label. Allow the recommended dwell time, then rinse thoroughly.
- Allow the timber to dry completely. Lightly sand raised grain or rough areas and remove all dust.
- Apply your chosen compatible deck coating according to its manufacturer’s instructions.
Deep Cleaner: loosens weathered fibres, tannins, dirt and organic contamination so the surface can be properly restored.
Wood Rejuvenator: neutralises the cleaned surface, brightens the timber and helps create a more consistent base for the next coating.
- Read both product labels and Safety Data Sheets before use
- Wear suitable gloves, eye protection, protective clothing and footwear
- Protect plants, painted surfaces, metal fittings and nearby areas from cleaner and runoff
- Work in suitable weather and do not allow products to dry on the timber
- Keep children and pets away until the area is rinsed, dry and safe
Does this kit include deck oil?
No. It prepares the timber before a compatible oil or coating is applied.
What if my deck has been oiled or coated before?
Choose Strip & Rejuvenate instead. A product called “decking oil” may be a water-based coating, so don’t choose from the name alone. Send us photos if you’re unsure.
Can I coat immediately after rejuvenating?
No. Rinse thoroughly and allow the deck to dry completely before sanding or coating.
Use this kit for new timber or grey timber that has never been oiled or coated. Clean first, follow with Rejuvenator, then let the timber dry before the next stage.
If the deck has been treated before, or you don’t know its history, ask us before choosing. We’d rather help you pick the right kit than have you start with the wrong one.
See the Wood Deep Cleaner in Action
Watch how Wood Deep Cleaner is used to prepare new timber or grey timber that has never been oiled or coated before rejuvenating and applying the selected finish. Always follow the current product label.