Wood Finish Stripper — 5L
Use this when your timber has an existing oil, stain or coating that needs to be removed before restoring or resealing.
Your Timber System
Where this product fitsUse this when
- Your deck has an existing coating.
- The old finish is peeling, patchy or failed.
- Water does not absorb evenly into the timber.
- You are preparing timber before a new finish.
Do not use this when
- The timber is bare, grey and weathered with no coating.
- You only need routine maintenance cleaning.
- You are trying to remove heavy paint.
- You are not planning to rejuvenate after stripping.
Is This Right For Your Job?
Select your situationChoose The Right Size
5L or larger packComplete The System
Usually used with these products
Video Tutorials
Learn before you startHow To Use
Simple field process- Wet the timber surface before application.
- Apply evenly with sprayer, brush or broom.
- Allow correct dwell time and keep the surface active.
- Agitate where needed using a deck brush.
- Rinse thoroughly with controlled pressure.
- Follow with Wood Rejuvenator before coating.
Coverage & Technical Info
Open detailsCoverage
Coverage depends on timber condition, coating type, dwell time and number of applications required.
Suitable surfaces
Exterior timber decks, screens and timber surfaces with compatible old oils or finishes requiring removal.
Weather conditions
Avoid applying in extreme heat, rain, or when the timber cannot be rinsed and dried properly afterwards.
Safety
Wear suitable gloves, eye protection and protective clothing. Follow label and safety instructions.
Safety Data Sheet
Download the SDS before use and follow all handling, PPE, storage and disposal instructions.
Resources & Guides
Helpful downloadsCommon Mistakes
Avoid these issuesUsing stripper when cleaner is needed
If the timber is bare, grey and absorbent, a deep cleaner may be the better starting point.
Skipping rejuvenator
After stripping, timber should usually be rejuvenated before applying protection.
