?unique=5e387b9)
Wood Finish Stripper | Viccon Wood Care
Professional-grade timber & deck finish remover — removes film, oil and solvent-based finishes.
- Removes oil, water & solvent-based timber coatings from all species of timber
- Remove multiple layers in one application
- Saves hours of sanding
- Safe for gardens, no harsh chemicals
- Use on decks, fences, pergolas & furniture
- Spray, brush, or roll on
- Covers 5–6 m² per litre
- Always follow with Wood Rejuvenator for best results
Fast Shipping Dispatched within 2–3 business days Australia-wide.
Remove Timber & Deck Coatings and Sealers the Smart Way — No More Endless Sanding
Viccon Wood Finish Stripper is a professional-grade timber restoration solution designed to break down multiple layers of oil-, solvent-, and water-based coatings and sealers in a single application—saving hours or even days of labor-intensive sanding.
Whether you're removing faded decking oils, peeling coatings, or thick built-up finishes, this product does the hard work for you.
Formulated without harsh chemicals, it’s safe to use around gardens and pets when applied as directed.
- Removes multiple layers in a single application
- Suitable for both horizontal and vertical timber surfaces
- Coverage: 5–6 m² per litre
- Tested on Intergrain, Cabots, Cutek, Haymes, Feats Watson, Flood, Sikkens, and other timber coating systems
- Ideal for decks, fences, pergolas, and outdoor furniture
- Garden- and pet-friendly formula
- Clear the surface area of dust and debris. Ensure the surface is completely dry before application.
- Wear protective gloves, safety glasses, and a respirator.
- Shake the container well. Apply undiluted using a spray pump, brush, or roller.
- Keep the surface consistently wet — reapply stripper or lightly mist with water as needed.
- Allow the product to dwell for 45–60 minutes. Heavier or aged coatings may require additional time.
- Use a petrol-powered pressure washer with a maximum pressure of 3000 PSI and minimum 11 L/min flow rate.
- For best results, fit a turbo nozzle and maintain a safe working distance to avoid timber damage.
- Always work along the direction of the timber grain. Rinse thoroughly to remove all chemical residues.
- Follow with Viccon Wood Rejuvenator to neutralise the timber and prepare the surface for resealing.
Viccon Wood Finish Stripper is suitable for use on a wide range of hardwood and softwood species. Its advanced formula works with the timber’s natural grain and porosity, delivering effective results without surface damage.
Compatible species include:
- Merbau
- Spotted Gum
- Silver Ash
- Blackbutt
- Tallowwood
- Jarrah
- Ironbark
- Cypress Pine
- Treated Pine
- Radiata Pine
- Other exterior timber species used in decking, cladding, and outdoor structures
- Work in manageable sections of up to 30 m² for better control
- Avoid application in temperatures above 35°C
- Always test turbo nozzles on a small section before full use
- Do not pressure blast at close range — keep the lance moving and at a safe distance
- Thicker or stubborn finishes may require a second application
- Is this product safe for plants and garden areas?
- Yes — it’s water-based, biodegradable, and safe when used as instructed.
- What safety gear is required?
- Use gloves, safety glasses, and a respirator. Apply only in well-ventilated areas.
- Does this work on all finishes?
- It removes water-, oil-, and solvent-based finishes. Not suitable for epoxy or two-pack coatings.
- How many layers can it strip?
- Up to six layers, depending on the coating’s age, type, and thickness.
- What is the expected coverage?
- Approximately 5–6 m² per litre under standard conditions.
- Do vertical surfaces need special treatment?
- Yes — they may require additional dwell time or a repeat application.
| SIZE | 5L or 15L |
| Brand | Viccon Wood Care |