?unique=16a31f3)
Wood Deep Cleaner | Viccon Wood Care
Strip stains, oils, and tannins fast — no sanding, no waiting.
Viccon Wood Deep Cleaner is step one in Viccon’s Timber Restoration System, removing old oils, mildew, and grey fibres — and stripping natural tannins from new timber to help oils and sealers penetrate properly without waiting months.
- Removes penetrating oils, stains, and tannins
- Prepares new timber for immediate sealing
- Restores weathered, grey, or dirty timber
- Cleans off mildew, moss, and algae
- Works fast — 30–45 minutes
- Easy application: spray, brush, or roller
- Coverage: 6–8 m² per litre
- Always follow with Viccon Wood Rejuvenator for best results
Fast Shipping Dispatched within 2–3 business days Australia-wide.
Restore Weathered Timber — Eliminate Tannins, Mildew & Old Oil Finishes
Viccon Wood Deep Cleaner is a fast-reacting timber restoration solution formulated to deep-clean and revive aged or weathered exterior wood. Whether you're preparing new timber for coating or removing dirt, tannins, mildew, or faded oils from old surfaces, this product delivers visible results in as little as 30–45 minutes.
Formulated without harsh chemicals, it’s environmentally friendly, garden-safe, and ideal for both DIY users and professionals needing reliable performance with minimal effort.
Whether you’re restoring an old deck or prepping new hardwood for coating, this cleaner delivers serious results.
To achieve the best results, always follow the correct application method. Viccon Wood Deep Cleaner is formulated for efficiency, but proper use ensures thorough cleaning, tannin removal, and surface preparation for coating.
Preparation
- Sweep or rinse off any surface debris, dirt, or loose materials.
- Mask and protect any adjacent painted, powder-coated, or aluminium surfaces.
- Ensure the timber surface is slightly wet before starting — never apply to dry surface.
- Wear appropriate safety gear: gloves, eye protection, and a respirator.
Application Steps
- Shake the container well to mix contents before use.
- Apply the product undiluted using a brush, roller, or pump-action garden sprayer.
- Evenly cover the entire surface, working in manageable sections.
- Allow the cleaner to react for 20–45 minutes depending on timber condition (20 minutes for new timber, up to 45 minutes for heavily weathered or oiled timber).
- Keep the surface consistently moist during this time — re-apply more cleaner or light water mist to prevent drying.
- For heavily soiled or tannin-rich surfaces, agitate lightly with a deck brush to enhance penetration.
- Rinse thoroughly with a pressure washer (recommended max 3000 PSI and) to remove all residue.
Post-Cleaning
- For enhanced results, follow up with Viccon Wood Rejuvenator to brighten and neutralise the surface before finishing.
- After cleaning, allow the timber to dry completely before applying any sealer or coating.
- Always test on a small area first
- Don’t let the cleaner dry on the surface
- Avoid hot sunny days – work early or in shade
- Rinse well to avoid whitening or streaks
- Deck restoration
- Fence and pergola prep
- New timber treatment before sealing
- Removes mildew, algae, grey fibres, and tannin stains
| SIZE | 5L or 15L |
| Brand | Viccon Wood Care |