Viccon Wood Care Wood Rejuvenator – 15L
Restore timber to it's natural colour. Neutralises stains and prepares wood for coating.
- Neutralises stains, chemical residue, tannins, and rust
- Restores timber to its natural colour
- Ready-to-use — no mixing required
- Fast-acting: works in 15–20 minutes
- Easy application: spray, brush, or roller
- Coverage: 6–8 m² per litre
- Suitable for all exterior timber — decks, fences, pergolas, outdoor furniture
Free Metro Delivery
Enjoy FREE metro delivery on all orders $199 +
NSW, VIC, QLD, ACT, and SA.
(Standard delivery rates apply for orders under $199 or outside metro areas.)
Not applicable to dangerous goods.
| Size: 15L |
| Brand: Viccon Wood Care |
Viccon Wood Rejuvenator is the essential second step in the Viccon's Timber Restoration System — a professional-grade solution that brightens and restores timber after stripping or deep cleaning. It neutralises any remaining chemicals, brightens aged or stained timber, and prepares the surface for coating.
Perfect for deck maintenance cleans sealed with penetrating sealers or full restoration projects. Gentle on the environment, tough on stains.
- Neutralises stains, chemical residue, tannins, and rust
- Restores timber to its natural colour
- Ready-to-use — no mixing required
- Works in 15–20 minutes
- Easy application by spray, brush, or roller
- Coverage: 6–8 m² per litre
- Suitable for use on all exterior timber: decks, fences, pergolas, outdoor furniture
- Prep the timber — use Wood Finish Stripper or Wood Deep Cleaner first. Ensure the surface is clean and free of oils, finishes, and organic growth.
- Lightly pre-wet the surface with a garden hose mist if dry.
- Wear protective gear: gloves, eyewear, and a respirator.
- Shake well and apply the product undiluted using spray, broom, or roller.
- Work in sections up to 30 m². Keep the surface wet during dwell time.
- Let sit for 15–20 minutes. For deep stains, reapply if needed.
- Rinse thoroughly using a pressure washer (max 2700 PSI) or hose, working with the timber grain.
- Light sanding (60–80 grit) is recommended to smooth lifted fibres and remove residual finishes.
- Allow timber to fully dry (moisture <15%) before applying sealer.
- Not suitable for animal urine stains
- Whitening may occur temporarily if not rinsed properly — disappears within 1 hour
- Some timber may appear lighter after use but will darken again once sealed
- Use in well-ventilated areas only
- Wood Finish Stripper / Deep Cleaner – Remove coatings and contaminants
- Wood Rejuvenator – Neutralise, brighten, and prep
