5L Salt Stop | Rockstar
High-performance water-based sealer that stops salt damage in its tracks. Salt Stop bonds deep to protect porous surfaces from saltwater and de-icing corrosion — without changing the look or breathability of your surface.
Key Benefits
Salt shield – blocks saltwater and de-icing ingress
Efflorescence control – prevents salt bloom and crystal staining
Water-based & low VOC – safer for people and planet
Breathable barrier – no peel, no blister
Silane technology – deep penetrating protection
UV & alkali stable – handles the heat and harsh Aussie weather
Fast Shipping Dispatched within 2–3 business days Australia-wide.
Protect your paving, pool surrounds and stonework from salt corrosion — permanently.
Salt Stop is a pro-grade, penetrating silane sealer that locks out water and salts without forming a film. Whether you’re sealing around a saltwater pool, protecting pavers from de-icing salts, or hardening concrete against the elements — this product delivers serious, long-lasting performance.
It bonds chemically inside porous materials like:
Concrete pavers
Porous tiles & grout
Brickwork
Terracotta
Natural stone (e.g. sandstone, travertine)
Ideal for:
Saltwater pool zones
Exposed coastal paving and facades
Driveways, garages, balconies
Council paths, public infrastructure, hardscapes in frost zones
🛑 Not for surfaces already exposed to salt. Always seal before contamination for best results.
Application Tips
Surface prep matters
Surface must be dry, clean, and salt-free.
Remove any prior coatings, dirt, or contaminants.
Tools
Low pressure pump sprayer, brush, or roller.
For best results: flood-coat method using a sprayer.
Apply generously
Keep surface glossy wet for 10 mins. Recoat immediately if it absorbs too fast.
Wipe off standing product to prevent patchiness.
On verticals, apply top-down, allowing the liquid to run 30–50cm.
Curing time
Surface repellency starts once dry.
Full cure in 24–72 hrs — avoid heavy traffic during first 24 hrs.
Coverage
Up to 12 m² per litre (single coat) depending on porosity
Highly porous surfaces may require 2 coats
Product Info
Appearance: Milky white liquid (dries invisible)
Finish: Natural look
VOC: <15 g/L
pH: Neutral (7–8)
Pack size: 5L
Clean-up: Water
| SIZE | 5L |
| Brand | RockStar |