15L Concentrated Stripper | Viccon Wood Care

Designed for big jobs — trusted by professionals.

Viccon Wood Finish Stripper Concentrated is a cost-effective solution made for contractors and serious DIYers tackling large surface areas. This professional-grade stripper breaks down oil-based and water-based timber finishes fast — saving hours of sanding on prep work.

Dilute the 15L concentrate 1:1 with water and apply using a sprayer, brush, or roller. Once applied, it penetrates deep into timber coatings and lifts them cleanly after a 45–60-minute dwell time. Just rinse off with a petrol pressure washer (recommended 3000 PSI, 11–15 LPM flow, turbo nozzle preferred) and you're left with bare, refreshed timber — ready to rejuvenate and reseal.

Key Benefits

• Concentrated formula — dilute only what you need

• Removes decking oils and film-forming finishes (not suitable for varnish, polyurethane, or paint)

• High coverage — up to 180 m² per container

• Economical choice for large jobs

• Contractor-ready — ideal for exterior timber restoration

• Application-friendly — brush, roller, or pump sprayer

Where to Use It

• Decks, fences, pergolas, timber cladding

• Vertical and horizontal timber surfaces

• Suitable for weathered or previously coated timber

How to Use

1. Dilute the product 1:1 with clean water (only mix what you need).

2. Apply with a brush, roller, or pump sprayer — ensuring even surface coverage.

3. Dwell Time: Allow 45–60 minutes. Keep the surface damp throughout.

4. Rinse using a petrol pressure washer (3000 PSI / 11–15 LPM) with a turbo nozzle for best results.

5. Follow up with Viccon Wood Rejuvenator to neutralise and brighten timber before sealing.

Pro Tips

• Always test on a small patch before full application.

• Keep surface wet to prevent the stripper from drying out prematurely.

• Do not return diluted solution back into the concentrate container.

• For vertical surfaces, apply in smaller sections and reapply if needed due to runoff.