15L Concentrated Deck & Timber Stripper | Viccon Wood Care

15L Concentrated Deck & Timber Stripper

Professional-grade timber stripper for large exterior restoration jobs.

Viccon Wood Finish Stripper Concentrated is a contractor-grade deck and timber stripper designed to break down old decking oils, penetrating timber finishes, and selected film-forming coatings. It helps reduce heavy sanding during surface preparation and prepares exterior timber for rejuvenating and resealing.

The 15L concentrate is diluted 1:1 with clean water, giving up to 30L of ready-to-use stripping solution. Coverage is up to 180m² per container, depending on timber condition, coating build-up, and application method.

Ideal for contractors, deck restoration professionals, and serious DIY users working on decks, fences, pergolas, timber cladding, and other exterior timber surfaces.

Best For

• Removing old decking oils

• Preparing timber before resealing

• Exterior deck restoration

• Fence and pergola restoration

• Large timber maintenance jobs

• Contractors and high-volume users

Key Benefits

• Concentrated 15L formula — dilute 1:1 to make up to 30L of ready-to-use stripper

• High coverage — covers up to 180m² depending on timber condition and coating build-up

• Professional-grade stripping power — breaks down old oils and timber finishes

• Reduces sanding time — helps remove coatings before rejuvenating and resealing

• Ideal for large jobs — suitable for decks, fences, pergolas, cladding, and exterior timber

• Contractor-ready application — apply by pump sprayer, brush, or roller

Where to Use It

• Decks, fences, pergolas, and timber cladding

• Vertical and horizontal exterior timber surfaces

• Weathered or previously coated timber

• Outdoor timber surfaces being prepared for rejuvenating and resealing

Not Suitable For

This product is not suitable for removing paint, varnish, polyurethane, or heavy industrial coatings. Always test on a small area before full application.

How to Use

1. Dilute the product 1:1 with clean water. Only mix what you need.

2. Apply with a brush, roller, or pump sprayer, ensuring even surface coverage.

3. Dwell time: Allow 45–60 minutes. Keep the surface damp throughout the dwell period.

4. Rinse using a petrol pressure washer. For best results, use around 3000 PSI with 11–15 LPM flow and a turbo nozzle where suitable.

5. Follow up with Viccon Wood Rejuvenator to neutralise and brighten timber before sealing.

Pro Tips

• Always test on a small patch before full application.

• Keep the surface wet to prevent the stripper from drying out prematurely.

• Do not return diluted solution back into the concentrate container.

• For vertical surfaces, apply in smaller sections and reapply if needed due to runoff.

• After stripping and rejuvenating, finish with a suitable decking oil or exterior timber sealer.

FAQ

How much ready-to-use stripper does 15L make?
When diluted 1:1 with clean water, the 15L concentrate makes up to 30L of ready-to-use timber stripper.

Can this remove decking oil?
Yes. It is designed to remove old decking oils and timber finishes from exterior timber surfaces.

Can this remove paint or polyurethane?
No. This product is not suitable for paint, varnish, polyurethane, or heavy film coatings.

Do I need to use a pressure washer?
Yes, for best results. A petrol pressure washer around 3000 PSI with 11–15 LPM flow is recommended.

Should I use a rejuvenator after stripping?
Yes. Use Viccon Wood Rejuvenator after stripping to neutralise and brighten the timber before sealing.