Restore & Protect Up To 30m² Of Timber Decking
Everything you need in one matched system to strip old coatings, rejuvenate timber and protect your deck the right way.
Choose the right kit size
Select the kit size based on your approximate deck area.
What’s Included In This Kit
Matched products for the jobWood Finish Stripper
Removes suitable old coatings before restoration.
Wood Rejuvenator
Brightens and resets timber after stripping.
Protection Finish
Protects the timber after correct preparation.
Your Timber System
Complete prep-to-finish pathwayUse this kit when
- Your deck has an old coating that needs removal.
- You want a matched prep-to-finish pathway.
- You want to avoid choosing the wrong individual products.
- You are restoring around a 30m² deck area.
Do not use this kit when
- The timber only needs light maintenance cleaning.
- The deck is heavily painted and needs specialist removal.
- You only need one individual product.
- You are unsure about the existing coating type and have not checked first.
Video Tutorials
Learn the full systemHow To Use This Kit
Simple process- Check that the existing finish is suitable for stripping.
- Apply Wood Finish Stripper and allow correct dwell time.
- Agitate and rinse thoroughly.
- Apply Wood Rejuvenator after stripping.
- Allow timber to dry correctly.
- Apply the selected protection finish according to instructions.
Coverage & Technical Info
Open detailsCoverage
This kit is designed around a 30m² deck area. Actual coverage depends on timber condition, coating type, porosity and application method.
Suitable surfaces
Exterior timber decks and timber surfaces with suitable existing oils or finishes requiring removal before restoration.
Weather conditions
Avoid application during rain, extreme heat, strong wind, or when timber cannot dry properly before finishing.
Safety Data Sheets
Review SDS documents for each product in the kit before use.
Resources & Guides
Helpful downloadsCommon Mistakes
Avoid these issuesBuying the wrong kit
If your timber is bare and grey with no coating, a deep clean kit may be a better fit than a strip kit.
Not allowing drying time
Protection should only be applied once the timber is properly dry and ready for finishing.
